1200 mwater resistance of every Ploprof since the 2009 relaunch, twice the original's 600 m
CHF 131,250paid at Antiquorum in 2020 for a Cousteau diver's prototype estimated at CHF 20,000 to 40,000
282 g to 173 gapproximate weight of the steel 2009 Ploprof 1200M, then of the titanium 227.90 version
- 1968 to 1970
Two prototypes for saturation divers
As saturation diving moved from experiment to industry, Omega began working with the French diving firm COMEX in 1968. By then it had built two families of prototypes to the same specification, coded internally Ploprof 0 and Ploprof 1. Christie's describes a circa 1969 prototype on calibre 1000 that the Omega archives say was meant for testing by professional divers.
- 2009 to 2014
Ploprof 1200M in steel
Omega relaunched the line in 2009 as the Ploprof 1200M, water resistant to 1200 metres and driven by the Co-Axial calibre 8500. The steel case measures 55 x 48 mm and 17.50 mm thick, with a date at 4:30, a sapphire bezel ring and a Sharkproof mesh bracelet or a black or orange rubber strap. WatchTime notes one departure from 1970: the new case has a separate caseback.
- 2015 to 2022
Titanium and Master Chronometer
At Baselworld 2015 Omega moved the Ploprof to a titanium case and titanium mesh bracelet, with a ceramic bezel ring, a sapphire caseback and the METAS-tested calibre 8912. The date disappeared, but the hour hand can still be jumped to a new time zone. The titanium 227.90 references weigh about 173 g against 282 g for the steel 2009 model.
- 2023 to today
Summer Blue, original proportions
For the Seamaster's 75th anniversary in 2023, the Ploprof came back in O-MEGASTEEL with a Summer Blue gradient dial. Time and Tide reports the case returned to the 1970s dimensions, 55 mm wide and 45 mm lug to lug instead of 48 mm, and to a monobloc construction. Omega lists it at 15.50 mm thick on a blue rubber strap.
✦2021. Antiquorum sold a Ploprof prototype T 2 in titanium for CHF 43,750. According to a letter from former Omega Museum director Marco Richon, fewer than a dozen titanium cases were ordered from the case maker Schmitz Freres in the early 1970s, and the cost meant the idea was dropped.
✦2020. Antiquorum sold prototype no. 4-100, the first of batch 4 given to the Cousteau team for testing, for CHF 131,250 against an estimate of CHF 20,000 to 40,000. Its dive log notes complaints such as a dial hard to read at 100 m, and the lot essay cites a screen capture from the film Recco, Le Corailleur, shot by the Cousteau team in summer 1971, showing the prototype in its first test.
✦2017. Christie's sold a 1972 Seamaster 600 that was reportedly owned and used by Jacques Cousteau, then sold to the diving contractor Andre Galerne, for USD 6,250. The Omega archives record it as made on May 10, 1972 and delivered to SSIH in France as a special budget diving watch. The Cousteau ownership is a consignor's story that Christie's says the archives seem to support.
✦2015. At Baselworld 2015 Omega showed a titanium Ploprof 1200M Co-Axial Master Chronometer whose case and ceramic bezel were set with 40 carats of diamonds, valued at about $760,000.
✦1970. During COMEX's Janus operation, three professional divers wore the Seamaster 600 for four hours a day over eight days. Christie's links the watch to the world record for underwater exploration set at 253 metres in the Gulf of Ajaccio.
✦Christie's writes that the American diving research centre Ocean Systems Inc. of Tarrytown, New York, analysed the watch and concluded that, in proportion, it was more resistant than a submarine.