Rolex Prince Brancard

Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.

15 mm

Verification: Listed in our database

Attachment: spring bars

23 to 24 mm cases · 1928 to 1930

Indicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.

Watch line3 references
15 mm
Illustration drawn to scale: 24 mm case, 15 mm lugs

No photo of the Rolex Prince Brancard yet. Do you own one? Share a photo

Lug widths across the line

The Rolex Prince Brancard takes a 15 mm strap: all 3 references with a known width use 15 mm.

Filter references by lug width

The story · Since 1928

The story of the Rolex Prince Brancard

Rolex sold its rectangular Prince as "The Watch for Men of Distinction". Its large seconds dial was practical for reading a pulse, so doctors adopted it.

CHF 62,500

Sold, steel Ref. 1490 Prince Brancard, Phillips

Read the full storyHide the story
CHF 62,500Sold, steel Ref. 1490 Prince Brancard, Phillips
GBP 10,625Sold, 18K Ref. 971 Prince Brancard, Bonhams, 21 June 2017, including premium
CHF 10,000Realised, Ref. 1490 Prince Brancard, Christie's, 15 November 2010
Some 70 yearsTime a steel Ref. 1490 stayed in its box before being found in 1998

Chapters

  1. Late 1920s

    A watch for men of distinction

    Rolex built the Prince as a rectangular Art Deco wristwatch in the late 1920s. Rolex advertised it as a watch for men of distinction.

  2. 1930s

    The doctor's watch dial

    The seconds ran on a separate lower register, which made the dial easy to read for pulse counts. That layout gave the line its nickname, the doctor's watch.

  3. 1930s

    A shaped movement, a larger balance

    The winding and balance wheels sat at each end, allowing a larger balance and a longer autonomy.

  4. 1930s

    The flared Brancard case

    The rectangular case is waisted to the centre, creating a natural guard for the winding crown.

  5. 1930s

    Gold, two-tone and steel

    The Brancard was made in gold, two-tone and steel. Bonhams describes an 18K Ref. 971 with yellow and white gold stripes, and Phillips lists a steel Ref. 1490.

  6. 1998

    A box found after 70 years

    A steel Ref. 1490 was delivered to the Zurich retailer Beyer and was never sold. It came to light in 1998, during construction work.

  7. 2005

    Cellini Prince returns

    Rolex brought the Prince back in the Cellini range in 2005. The reissue used a sapphire display case back over a movement designed to be seen.

Generations and strap changes

  1. 1928
    Ref. 971 Prince Brancard

    An 18K two-tone Brancard with a flared rectangular case and a 15-jewel manual movement. Bonhams gives its size as 26mm at widest, and its Glasgow import mark is dated 1928.

    Black leather strap with plated buckle

  2. c.1930
    Ref. 1490 in steel

    A stainless steel Ref. 1490 with a manual cal. 350 movement of 15 jewels. Phillips states its case as 42mm long and 23mm wide.

    Leather strap with stainless steel pin buckle

  3. c.1935
    Ref. 1490, case no. 1699

    A Ref. 1490 with a flared case and a curved snap-on back, sold by Christie's in 2010 with its Rolex box. Christie's gives 26 mm wide and 43 mm overall.

    Stainless steel Rolex buckle

  4. 2005
    Cellini Prince reissue

    The Prince returned in the Cellini range. Its movement was designed for viewing through a sapphire case back, the first such caliber in series production.

3 Rolex Prince Brancard references

Rolex Prince Brancard references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.

  • 971

    Prince Brancard

    Lug width: 15 mm

    Source: Listed Attachment: Spring bars

    Case size: 23 mmYear: 1928White dialCase material: Yellow Gold

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Snap-on gold
    Production
    1928-1935
    Status
    Listed in our database, not yet verified
  • 1343

    Prince Brancard

    Lug width: 15 mm

    Source: Listed Attachment: Spring bars

    Case size: 24 mmYear: 1930Silver Art Deco dialCase material: White Gold

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Snap-on gold
    Production
    1930-1935
    Status
    Listed in our database, not yet verified
  • 1358

    Prince Brancard

    Lug width: 15 mm

    Source: Listed Attachment: Spring bars

    Case size: 24 mmYear: 1930Two-Tone Deco dialCase material: White Gold

    Attachment
    classic lugs
    Movement
    Manual
    Caseback
    Snap-on gold
    Production
    1930-1935
    Status
    Listed in our database, not yet verified

Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.

FAQ

What lug width does the Rolex Prince Brancard use?

The Rolex Prince Brancard takes a 15 mm strap: all 3 references with a known width use 15 mm. These widths are listed in our database; the maker check is in progress.

What lug width does the Prince Brancard have?

Auction catalogues give only case width and length, so no lug width is recorded.

What strap did the Prince Brancard come on?

Phillips lists a leather strap with a stainless steel pin buckle on Ref. 1490. Bonhams lists black leather with a plated buckle on Ref. 971.

Why is it called Brancard?

Christie's says the name comes from the French word for stretcher, and the case has flared sides.

Other Rolex collections

Help

What is lug width?

The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.

Measure it in 30 seconds

  1. Take the strap off, or look at the back of it: many straps print their width.
  2. Measure the inside gap between the lugs with a caliper or a millimetre ruler.
  3. Round to the nearest whole millimetre. Most watches use 18, 20 or 22 mm.

Strap, quick release or system?

Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.