ST‑1901B
01 Series (Gen3)
Lug width: 20 mm
Source: Listed Attachment: Spring barsCase size: 38.5 mmGrey dial
- Attachment
- classic lugs
- Status
- Listed in our database, not yet verified
To install WriStreet on your iPhone, tap then “Add to Home Screen”.
Install WriStreet on your phone: it opens like an app, even offline.
Every reference with a known width takes the same strap size. Your reference is engraved on the case back or between the lugs at 6 o'clock.
20 mm
Verification: Verified by the maker for ref. 01DST, 01GPB and 2 more
Attachment: spring bars
38.5 mm case
Official page: Studio Underd0g
Report an errorIndicative information. Check your watch before buying a strap: wristreet.com is not responsible for an incorrect size.
No photo of the Studio Underd0g 01 Series yet. Do you own one? Share a photo
The Studio Underd0g 01 Series takes a 20 mm strap: all 7 references with a known width use 20 mm.
The story · Since 2021
The Watermel0n, a hand-wound chronograph whose pink and green dial looks like the fruit, is the watch that put Studio Underd0g on the map. Richard Benc drew the first designs during the 2020 lockdown, and the first run of watches sold out.
38.5 mm
case diameter, the same on every generation of the 01 Series
The launch line-up was a trio in Worn & Wound's review, priced at $450.
Time+Tide began stocking the full collection in May 2023 and described the second generation as the first generation improved with hand-made Epsom calfskin straps. The watches were assembled in Britain, with quality control carried out by Horologium.
Seagull set a minimum order of 10,000 pieces for its ST-19 chronograph movement from 1 May 2024, a level most micro-brands cannot reach. Studio Underd0g secured its own ST-1901B under contract and opened the third generation to pre-orders on 19 November 2024.
In April 2025 T3 described the brand's watches as hard to get without paying inflated prices. Its reviewer waited about four months after a pre-order to receive a 01 Series.
2024. After Seagull's minimum order rule took effect, Studio Underd0g secured a bespoke ST-1901B, which Monochrome says is made under contract with Seagull. The third generation of the 01 Series was the first to use it.
2022. Hodinkee reported in January 2022 that Benc's first run of colourful designs had completely sold out, and that buyers ordered from the UK, US, Middle East and Asia. The sell-out is the moment the brand's demand became visible.
Benc, a designer who worked on product development at Braun, drew the 01 Series designs during the 2020 lockdown and founded the brand. Hodinkee calls him the London-based designer who posted his designs online.
The third generation has a 12.9 mm case, down from 13.6 mm, and an exclusive ST-1901B with a black mainplate and swan neck regulator. The dial now reads Assembled in Great Britain, and the rating is -10/+15 seconds per day in place of -15/+35.
[object Object]
Time+Tide describes the second generation as the first generation improved with hand-made Epsom calfskin straps and British assembly and quality control by Horologium.
[object Object]
The first watches are 38.5 mm across with 44.5 mm lug to lug and 13.6 mm thickness, and carry the hand-wound Seagull ST-1901 chronograph with a display back. Worn & Wound reviewed the trio at $450.
[object Object]
Studio Underd0g 01 Series references in our database. Each card says where its width comes from: listed by the maker (linked to the maker's page in the details), two independent sources agree, or listed in our database and not yet verified by us.
01 Series (Gen3)
Lug width: 20 mm
Source: Listed Attachment: Spring barsCase size: 38.5 mmGrey dial
01 Series Av0cado (Gen3)
Lug width: 20 mm
Source: Listed Attachment: Spring barsCase size: 38.5 mmMulti dial
01 Series Desert Sky (Gen3)
Lug width: 20 mm
Source: Verified, maker Attachment: Spring barsCase size: 38.5 mmCase material: 316L Stainless Steel
01 Series Go0fy Panda (Gen3)
Lug width: 20 mm
Source: Verified, maker Attachment: Spring barsCase size: 38.5 mmCase material: 316L Stainless Steel
01 Series Guacam0le (Gen3)
Lug width: 20 mm
Source: Listed Attachment: Spring barsCase size: 38.5 mmGreen dial
01 Series Mint Ch0c Chip (Gen3)
Lug width: 20 mm
Source: Verified, maker Attachment: Spring barsCase size: 38.5 mmMulti dialCase material: 316L Stainless Steel
01 Series Watermel0n (Gen3)
Lug width: 20 mm
Source: Verified, maker Attachment: Spring barsCase size: 38.5 mmCase material: 316L Stainless Steel
Verified: the width is listed by the maker or confirmed by two independent sources. The other widths are listed in our database.
No reference matches.
The Studio Underd0g 01 Series takes a 20 mm strap: all 7 references with a known width use 20 mm. The Studio Underd0g 01 Series ref. 01DST, 01GPB and 2 more take 20 mm (listed by the maker).
20 mm at the lugs, tapering to 16 mm at the clasp. The maker's Gen 3 page, Worn & Wound's 2021 review and Time+Tide's Gen 3 table all give 20 mm.
44.5 mm, according to the maker's page, Time+Tide's 2024 table and Worn & Wound's 2021 review. T3's 2025 review gives 45.5 mm, which is recorded as a divergence.
The maker rates the Gen 3 at 5 ATM, and Time+Tide lists 50 m. T3's reviewer found it survives a splash but is not built for diving, because it has no screw-down crown or pushers.
The gap between the two lugs that hold the strap, in millimetres. A new strap must match it exactly: 20 mm lugs take a 20 mm strap.
Most watches use spring bars, so any strap of the right width fits. Many smartwatches use their own band system instead, such as Apple Watch bands or Garmin QuickFit.